Battery Charger; Control Panel; Transportation, Storage And Disposal - Husqvarna S 138i Manuel D'utilisation

Battery charger

LED on the battery
charger
The error LED flash-
es
The error LED is on

Control panel

For model S 138i
Error Error code (Num-
ber of flashes)
Error LED flashes 3
5
9
7
The product stops 6
0
Other errors If other errors occur, turn the safety key to 0, remove the battery and speak to an approved
service agent.
Transportation
• The Dangerous Goods Legislation requirements
apply to the contained Li-ion batteries.
• For commercial transports special requirements on
package and labels must be obeyed.
• Make sure that you obey the regulations for
dangerous material when you prepare the product
for transport. Local regulations can apply.
• Always remove the battery for transport.
22
Possible faults
The temperature in the work en-
vironment is too high or too low
Possible faults
The motor is overloaded.
The motor speed drops too
much, and the motor stops.
The motor control is too hot.
Battery error or no signal from
battery.
The battery is weak.
The battery is weak.
Battery connector failure.

Transportation, storage and disposal

Possible procedure
Use the battery charger in temperatures between 5°C
and 40°C.
Speak to an approved service agent
Possible action
Decrease the work depth. Refer to
set the work depth on page 15 . If the er-
ror LED continues to flash, the dethatch-
er equipment is blocked. To prevent ac-
cidental start turn the safety key to 0, re-
move the battery and wait a minimum 5
seconds. Make sure that the dethatcher
equipment can move freely. If the prob-
lem continues, speak to an authorised
service agent.
Stop the motor and wait until it has be-
come cool.
Put the battery in the product correctly
and examine the battery connector. If the
error LED on the battery flashes, refer to
Battery charging status on page 16 .
Charge the battery. Refer to
the battery on page 16 .
Charge the battery. Refer to
the battery on page 16 .
Examine the battery connector.
• Put tape on the battery connectors and make sure
that the battery cannot move around during
transport.
• Attach the product during transport.
Storage
• Always remove the battery for storage.
• To prevent accidents, make sure that the battery is
not connected to the product during storage.
• Keep the battery charger in a closed and dry space.
To
To charge
To charge
937 - 005 -