3M Attest Auto-reader 390 Manuel De L'utilisateur page 10

Code/ Issue Problem
Negative Control Vial
Other
BI not properly activated/ media did not contact spore strip.
Negative Control Vial
Other
Control vial was sterilized.
Unexplained Positive BI
Other
Adhesive residue on vial.
Unexplained Positive BI
Other
Test vial is absorbing fluorescent residue from a chemical indicator or tape.
3M™ Attest™ Auto-reader 390 will not enter Configuration mode.
Other
Pushbutton Configuration may be disabled on 3M™ Attest™
Auto-reader 390 Web App.
3M™ Attest™ Auto-reader 390 LCD display flashes and asterisks (***) and/or
Other
E11 and/or C4 codes appear on display below unoccupied incubation wells.
OPTIONAL 3M™ ATTEST™ AUTO-READER 390 WEB APP
Web Browser Requirements
The Web Interface is designed to be viewed using an HTML5 compliant browser with
JavaScript enabled (e.g., Google Chrome).
Ethernet Connection:
Connection switch/router with auto-negotiation capability to identify the Auto-reader as
operating at 10 Mbps and half-duplex, or able to be manually configured as 10 Mbps and
half-duplex.
Connecting to the 3M™ Attest™ Auto-reader 390 Web App
To use the 3M™ Attest™ Auto-reader 390 Web App, the 3M™ Attest™ 390
Auto-reader must be connected to the facility network using the supplied Ethernet
cable. Consult with your facility IT personnel for assistance with network connectivity.
Each 3M™ Attest™ Auto-reader 390 has a unique MAC Address which is presented on
the unit's LCD Display when the user depresses the Info button three times. The MAC
Address is also provided at the bottom of the 3M™ Attest™ Auto-reader 390 Web App
Configuration page. Communication occurs using the http protocol over Port 80. Users
may connect to the 3M™ Attest™ Auto-reader 390 Web App using a URL based upon
either the 3M™ Attest™ Auto-reader 390 serial number or the IP Address. To view the
3M™ Attest™ Auto-reader 390 Web App from a computer on a sub-net different from
that to which the 3M™ Attest™ Auto-reader 390 is connected, use the IP Address URL.
Note: To access the 3M™ Attest™ Auto-reader 390 Web App within a secure network,
the PC must have access to the secure network; options include connecting via a network
Ethernet cable, signing in to the facility's wireless network, or connecting via a virtual
private network (VPN).
A. Serial number URL
1. Connect the supplied Ethernet cable from the 3M™ Attest™ Auto-reader 390 to an
Ethernet jack.
2. Depress the button once to display the 3M™ Attest™ Auto-reader 390 6-digit
serial number on the left side of the top row of text on the LCD display.
3. Enter http://attestxxxxxx where xxxxxx represents the unit's serial number (e.g.,
http://attest001127) from Step 2 in PC web browser address bar and press Enter.
4. 3M™ Attest™ Auto-reader 390 Web App Status page will display on PC. For future
ease of use, add this page to your web browser "Favorites."
B. IP Address URL
The 3M™ Attest™ Auto-reader 390 Web App may also be accessed using either a
dynamic or static IP address.
1. Dynamic IP Address
A dynamic IP address is assigned when the Ethernet cable is connected from the
3M™ Attest™ Auto-reader 390 to a live Ethernet jack.
Solution
Ensure BI cap is closed, and glass ampoule is crushed. Tap BI until media flows
to and wets spore strip at bottom of BI.
Check process indicator on BI label. Use a non-sterilized vial as a control.
Do not place tape or labels on vial.
Place the vial so it does not come in direct contact with chemical indicators or
tape.
On 3M™ Attest™ Auto-reader 390 Web App Configuration Page, go to
Pushbutton Configuration and select the Enable radio button. Save changes to
begin using new setting.
Move 3M™ Attest™ Auto-reader 390 away from sunlight or sources of
incandescent light.
Press and release the button twice to display the 3M™ Attest™ Auto-reader 390's
dynamic IP address. Enter http://IPaddress (e.g. http://xxx.xxx.xxx.xxx) in the PC's web
browser address bar and press Enter. The 3M™ Attest™ Auto-reader 390 Web App
Status page will display.
2. Static IP address
Some facility IT personnel may require devices connecting to the network to use a Static
IP address. If this is the case at your facility, contact the IT department to request a Static
IP address.
Record the static IP address provided by your facility IT department here: ___________.
You may wish to label the Ethernet jack with the assigned address. Enter
http://StaticIPaddress (e.g. http://xxx.xxx.xxx.xxx) in the PC's web browser address bar and
press Enter. The 3M™ Attest™ Auto-reader 390 Web App Status page will display.
About the 3M™ Attest™ Auto-reader 390 Web App Pages
The 3M™ Attest™ Auto-reader 390 Web App includes four pages:
a) Status page
Status
History
ATTEST 1291
1 2 3 4
+ – – 48
1. User-entered nickname (optional)
2. Well Configuration (1-5 and 6-10)
3. Well Number
4. BI Result/Remaining Incubation Time
5. Date and Time
6. 3M™ Attest™ Auto-reader 390 Serial Number
The Status page provides a real-time representation of the 3M™ Attest™
Auto-reader 390 configuration and LCD panel display. The current date and time and
3M™ Attest™ Auto-reader 390 serial number are also indicated on this page. From this
page, the user may navigate to:
• the History page by clicking on History on the left of the screen.
• the Results Detail page by clicking on the well number of an occupied well (i.e., a well
that currently has an incubating BI). Clicking on an unoccupied well takes the user to
the History page.
3M™ Attest™ Auto-reader 390
ATTEST 1292
5 6 7 8 9 10
+ – – 176
2018-10-18 14:36
SN
200004
9