Parts Identification
9 MUTING switch
Set to ON to eliminate the noise and signal interference
when the tuner is in signal reception standby mode.
See "Muting Functions" on page 12.
q; + (+ selection) / – (– selection/reset) buttons
In setting mode, select the receiving group, channel and
frequency using either of these buttons, or reset the time-of-
use indication to "00:00" with the – button.
See "Settings" on page 8.
qa MONITOR control
Turn to adjust the monitoring level through headphones.
6
(GB)
Power Supply
The tuner can operate on two LR6 (size AA) alkaline
batteries continuously for about 5 hours at 25°C (77°F).
Installing the batteries
1
Slide the battery-holder catches inward ( in the direction
of the arrows b b b b b B ) to take out the battery holder.
Two LR6 (size AA)
alkaline batteries