Switching The Appliance On; Operating Tips; Setting The Temperature; Refrigerator Compartment - Gaggenau RC 242 Mode D'emploi

Masquer les pouces Voir aussi pour RC 242:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Switching the appliance on

Switch on the appliance with the On/Off button ÿ .
The temperature display indicates the set
temperature.
The appliance begins to cool. Light is switched on
when the door is open.
We recommend a factory setting of +4 °C in the

refrigerator compartment.

Do not store perishable food warmer than +4 °C.

Operating tips

After the appliance has been switched on, it may
take several hours until the set temperature has
been reached.
Do not put any food in the appliance beforehand.
The front sides of the housing are partly heated
slightly. This prevents condensation in the area of
the door seal.
28

Setting the temperature

Refrigerator compartment
The temperature can be set from +3 °C to +8 °C.
Keep pressing temperature setting buttons +/- until
the required refrigerator compartment temperature is
set.
The value last selected is saved. The set temperature
is indicated on temperature display.

Cool-fresh compartment

The temperature in the cool-fresh compartment is
about 0 °C.
Note
If frost forms on the refrigerated food in the "cool-
fresh" compartment, increase the temperature (see
chapter Eliminating minor faults yourself).

Publicité

Table des Matières
loading

Table des Matières