Switching Off The Cooling Device; Defrosting The Cooling Device - Dometic COOLFREEZE CF 11 Notice D'utilisation

CoolFreeze
I
NOTE
When the cooler is supplied by the starter battery, select the battery
monitor mode HIGH. When the cooler is connected to a supply battery,
the battery monitor mode LOW will suffice.
If you wish to operate the cooling device from the AC mains, set the
battery monitor to LOW.
6.10

Switching off the cooling device

fig. 1, page 3, fig. 2, page 3
➤ Empty the cooling device.
➤ Switch the cooling device off: Press the ON/OFF button (1) for three seconds.
➤ Disconnect the plug.
If you do not want to use the cooling device for a longer period of time:
➤ Leave the lid slightly open. This prevents odours from building up.
6.11

Defrosting the cooling device

Humidity can form frost in the interior of the cooling device or on the evaporator. This
reduces the cooling capacity.
Defrost the device in good time to avoid this.
A
NOTICE! Risk of damage to the device!
Never use hard or sharp tools to remove ice or to free objects frozen
onto the device.
To defrost the cooling device, proceed as follows:
➤ Empty the contents.
➤ If necessary, put them in another cooling device to keep them chilled.
➤ Switch off the device.
➤ Leave the lid open.
➤ Wipe off the condensate.
EN
Operation
15