Cleaning The Cabinet Filter - Invacare Perfecto2 Série Manuel D'utilisation

7.2 Cleaning the Cabinet Filter

CAUTION!
Risk of damage
To avoid damage from clogging:
– DO NOT operate the concentrator without the filter
installed.
There is one cabinet filter located on the back of the cabinet.
1163146-H~07
1. Remove the filter and clean as needed.
Environmental conditions that may require more
frequent inspection and cleaning of the filter include, but
are not limited to: high dust, air pollutants, etc.
2. Clean the cabinet filter with a vacuum cleaner or wash with a
mild liquid dish detergent (such as Dawn™) and water. Rinse
thoroughly.
3. Thoroughly dry the filter and inspect for fraying, crumbling, tears
and holes. Replace filter if any damage is found.
4. Reinstall the cabinet filter.
Maintenance
25