First Use - Helite HIP' SAFE Manuel D'utilisation

20

First use

1- Test the belt on your hips
The belt is ergonomic and fits exactly over the hips. It must neither be too tight nor too loose.
Too tight.
2- Adjust the size
If the belt does not fit exactly over the hips:
Remove the protection cover
Pull the strap to adjust.
User Guide
entirely.
Too loose.
Adjust the belt to your size by
placing the strap in the good position
to increase or reduce the size.
starting from the center.
Good position.
The adjusting
system is on
the back of
the belt.
Replace the cover