First Use - Helite B'safe Manuel D'utilisation

32

First use

STEP 1: PAIR THE SADDLE SENSOR WITH THE VEST
Before using your B'Safe vest, it is necessary to pair (which means associate) the
vest with the saddle sensor. To do so, you need the vest, the saddle sensor and the
magnet. Make sure the cartridge is connected to the vest.
User Guide
x3
3
2
sec
. Press the button
the LED turns blue.
go to the next step.
3
. Place the magnet on the saddle sensor
round sign. Please note that you only have 30 seconds to
effect this procedure.
• If you hear a LONG BEEP: the vest and the saddle
sensor are paired.
• If you hear a SHORT BEEP: the vest and the saddle
sensor have already been paired.
1
. Switch ON the vest
times the button
The LED flashes green and you hear
a «beep».
for 3 seconds
Release the button and
by pressing 3
.
until
over the