Helite B'safe Manuel D'utilisation page 34

34
3. Place the sensor on the bicycle
Make sure to thoroughly clean your bicycle frame before installing the
!
sensor.
• Place the sensor on the bicycle frame on the seatpost or on the seat
tube. Make sure that nothing will impact the sensor during the installation
(bike lock, water bottle, etc.).
STEP 3: WEAR THE VEST
Put on the vest and close the zipper to the top to ensure that you are well protected.
• Screw in the big screw.
Do not tighten too much. You can stop to screw when it gets difficult
to turn the bracelet with your hand.
User Guide