Possible Causes; Disclaimer - Helite HIP' SAFE Manuel D'utilisation

32
ISSUE 2: There is no beep sound when I turn on my Hip'Safe
NORMAL CASE: The belt should make a quick beep sound when it is turned on

POSSIBLE CAUSES

The belt is out of battery.
If this action does not help, please contact our after sales service: hipsafe@helite.com or call
+33 03 80 35 48 26.

Disclaimer :

•This product is "Certified CE (compliance with EU Regulation 2016/425) by ALIENOR CERTI-
FICATION, Zone du Sanital, 21 Rue Albert Einstein CHATELLERAULT-France-organisme notifié
n° 2754"
• Please note, no body protector can prevent death or serious injuries in certain accidents.
• Helite will be held in no way responsible for any bodily injury or death, and/or property
damage that may occur whilst using any Helite airbag garment.
• Helite accepts no responsibility or liability for any improper installation and usage of
Hip'Safe.
• All Helite airbag garments are rigorously tested before being sold. Every airbag garment is
inflated with double pressure as normal, however we cannot guarantee the airbag garment
will inflate every time.
• Helite cannot be held responsible should the airbag garment not inflate
• The belt does not cover 100% of risks during a fall.
• The belt does not detect 100% of falls. In case of slow fall, the system may not detect it.
• Hip'Safe does not protect parts outside the airbags (The coccyx for example).
• Any alterations, wrong use or wrong storage of the device may cause a malfunction.
• This PPE does not contain any allergenic substances. It does not cause any irritation or
discomfort to the user.
User Guide
and send us back the belt.
ACTION
Recharge Hip'Safe with the USB cable
included in the belt.