Product Specifications - Ryobi CJSP-1801QEOM Manuel D'utilisation

GB
F D
RULES FOR SAFE OPERATION
PROTECT YOUR HEARING. Wear hearing protection
■
during extended periods of operation.
SECURE WORK. Use clamps or a vise to hold work.
■
It's safer than using your hand and it frees both hands to
operate tool.
STORE BATTERY OR IDLE TOOLS. When not in use,
■
tools and batteries should be stored separately in a dry,
high or locked up place, out of reach of children.
Ensure that battery terminals cannot be shorted by other
metal parts, such as screws, nails and etc.
KEEP CHILDREN AND VISITORS AWAY. All visitors
■
should wear safety glasses and be kept a safe distance
from work area.
AVOID DANGEROUS ENVIRONMENT. Do not use
■
power tool in damp or wet locations or expose to rain.
Keep work area well lit.
DON'T OVERREACH. Keep proper footing and balance
■
at all times. Do not use on a ladder or unstable support.
MAINTAIN TOOLS WITH CARE. Keep tools sharp at all
■
times, and clean for best and safest performance.
Follow instructions for lubricating and changing accessories.
REMOVE ADJUSTING KEYS AND WRENCHES.
■
Form habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.
NEVER USE IN AN EXPLOSIVE ATMOSPHERE.
■
Normal sparking of the motor could ignite flammable
liquids, gases, or fumes.
KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL
■
AND GREASE. Always use a clean cloth when cleaning.
Never use brake fluids, petrol, petroleum-based
products or any strong solvents to clean your tool.
STAY ALERT. Watch what you are doing and use
■
common sense. Do not operate tool when you are tired.
Do not rush.
CHECK DAMAGED PARTS. Before further use of
■
the tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function.
Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or other
part that is damaged should be properly repaired or
replaced by an authorized service centre.
DO NOT USE TOOL IF SWITCH DOES NOT TURN IT
■
ON AND OFF. Have defective switches replaced by an
authorized service centre.
DRUGS, ALCOHOL, MEDICATION. Do not operate tool
■
while under the influence of drugs, alcohol, or any
medication.
E I P NL S DK N FIN GR
English

PRODUCT SPECIFICATIONS

Motor
Switch
No Load Speed
Maximum Cutting
Thickness (wood)
Blade Stroke
Shank capacity
Battery Pack (not included)
Charger (not included)
NOTE: This tool is only designed to work with T shank
blades, other types of saw blades are not guaranteed to
work properly.
DESCRIPTION
KNOW YOUR ORBITAL JIGSAW.
1. LOCK-OFF BUTTON
2. TRIGGER SWITCH
3. ORBITAL ADJUSTMENT KNOB
4. SAW BLADE
5. BASE
6. BLADE GUARD
7. BLADE STORAGE AREA
8. HEX KEY
9. BLADE CLAMP
10. BLADE CLAMP LOCK
11. TO DECREASE ORBITAL SPEED
12. TO INCREASE ORBITAL SPEED
13. BASE PIVOT SCREWS
14. SCALE
15. EDGE GUIDE SCREW
16. EDGE GUIDE
17. LATCH
18. DEPRESS LATCH TO RELEASE BATTERY PACK
19. BATTERY PACK (NOT INCLUDED)
8
RO
H CZ RUS
WARNING
The use of any accessory or attachment, other than
those recommended in this instruction manual,
may present a risk of personal injury. Endsure that
the battery pack is correct for the tool. Ensure that
the outside surface of battery pack or tool is clean
and dry before plugging into charger. Ensure that
batteries are charged using the correct charger
recommmeded by the manufacturer. Incorrect use
may result in a risk of electric shock, overheating or
leakage of corrosive liquid from the battery.
18 V
Variable Speed
0-2100 min
40 mm
25.4 mm
6.35 mm
BPP-1817M / BPP-1815M
BC-1815-S / BC-1800
HR
PL SLO TR
-1