WORKING AREA
The operator must guarantee a minimum safety distance around the product before the lifting operations :
minimum safety distance with respect to other equipments around the product or with respect to the walls of
the body shop. It is recommended to materialize this area by specific tape in order to limit the access to the
lifting area and avoid non-authorized people passing by in the area. The field of vision must be clear for the
operator in order to be able to observe with a maximum of focus during the lifting and descent phases.
During the lifting of the load, the SPOT LIFT product will move around 30cm forward towards the vehicle being
lifted. It will move 30cm backwards during the descent phase. For safety reasons, the operator must always be
in a position to escape during the lifting and descent phases.
052864_01 11 2014_V5.1
- 16 -