Mainconnection - Christopeit Sport VIBRO 5000 Notice De Montage Et D'utilisation

Step 4:
Assembly of computer (32) at support (34).
Put the computer (32) near the computer holder of support (34) and
connect the pulse cables (59) and connection cable (58) with
computer (32).
Place the computer (32) onto the support without squeezing the
cables and secure with screws M6x12 (63) and washers (64).
Step 5:
Assembly of elastic ropes (56).
Turn the eye bolts M6x30 (55) into the threaded holes provided on
the base plate (35). Connect the elastic ropes (56) to the eyebolts (55)
using the snap hooks (57). Before each training with the elastic
trains, make sure that they are undamaged and properly secured.
Step 6:
Checks and commissioning.
1. Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
Put the net cable (65) into the socket of base frame and into wall po-
wer (230V~50Hz). Put the main power switch (26) into ON Position.
2. When everything is in order, familiarise yourself with the machine
at a low resistance setting and make your individual adjustments.
3. To move the machine easy to the place you need, put your
hands at the handlebar an pull towards until you can move it on
the transportation roller.
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.

Mainconnection:

a) Mainswitch = switches on and off the machine
b) Overload fuse = Protects teh machine für overload.
c) AC Plug for AC Connection
c)
b)
a)
12