Explanation Of Displays And Buttons - Becker Centronic UnitControl UC52 Notice De Montage Et D'utilisation

Assembly and Operating Instructions

Explanation of displays and buttons

Manual/Automatic
sliding switch
Control light
Cover
Buttons under the cover
Encoding switch (on back of device)
1. DIP-switch (only if used as a drive control)

Upper position
alarm signal function off.

Lower position
alarm signal function on.
2. DIP-switch

Upper position
group controller

Upper position
drive controller
3. DIP-switch

Upper position
venetian blind mode

Lower position
roller shutter/awning mode
18
AUTO
Reset
UC52
UP button/
RETRACT button
STOP button
DOWN button/
EXTEND button
RESET button
PROGRAMMING button
Ventilation/reverse position
PROGRAMMING button
Intermediate position