Dometic DC-Kit5 Instructions De Montage Et De Service page 18

Installing and connecting the DC kit
7.6 Connecting the FJ1100, FJ1700, FJ2200 Dometic roof
air conditioner
➤ Remove the outlet panel of the roof air conditioner, if necessary also remove the
upper cover ( FJ1100, FJ1700, FJ2200) (fig. 8, page 6).
➤ Join on/off cable for FJ1100, FJ1700, FJ2200 to the plug connector on the circuit
board (fig. 9, page 6).
I
NOTE
Guide the on/off cable carefully past the fan.
➤ Join the universal connection cable to the on/off cable of the FJ1100, FJ1700,
FJ2200.
➤ Connect the universal connection cable with connections I2 and I5 of the
charging current distributor ( ECL-103) (fig. 3 1 and 2, page 4).
➤ Attach the outlet panel of the roof air conditioner ( FJ1100, FJ1700, FJ2200)
(fig. 8, page 6).
➤ Run the connection cable of remote control MCR-9 to the inverter and connect
( MSI1824T).
7.7 Connecting the FL1600, FL2200 Dometic roof air
conditioner
➤ Remove the outlet panel of the roof air conditioner, if necessary also remove the
upper cover ( FL1600, FL2200) (fig. 0, page 7).
➤ Join on/off cable for FL1600, FL2200 to the plug connector on the circuit board
(fig. a, page 8).
I
NOTE
Guide the on/off cable carefully past the fan.
➤ Join the universal connection cable to the on/off cable of the FL1600, FL2200.
➤ Connect the universal connection cable with connections I2 and I5 of the
charging current distributor ( ECL-103) (fig. 3 1 and 2, page 4).
➤ Attach the outlet panel of the roof air conditioner ( FL1600, FL2200) (fig. 0,
page 7).
➤ Run the connection cable of remote control MCR-9 to the inverter and connect
( MSI1824T).
18
DC-Kit5
EN