Description Of Mnu 180 Control Elements; Guidelines To Follow Prior To Startup - Essilor MNU 180 Manuel D'utilisation

4.5
A
5.
Packaging
Control for damage in
transit
Placement
ADVISORY

Description of MNU 180 control elements

Cleaning time rotary switch*
A.
Assigned settings: 1, 2, 3, 4, 5, 10, 15, 20, 25 and 30 min (with
automatic shutdown).
Continuous mode settings ∞. In this case, the shutdown must be
executed manually.
For safety reasons, the device shuts down automatically after 12
hours in service.
B. "Sweep" function key to ensure a uniform distribution of the sound
field within the liquid solution. LED Sweep diode.
C. Degas key to yield a solution of outstanding efficiency.
D. On/off button for turning on and off the device. LED on/off diode.
*Select time and temperature: Turn in clockwise direction; and
Cancel the selection: Turn in counterclockwise direction.
Guidelines to follow prior to service startup
If possible, store the packaging material or discard it in accordance
with the waste disposal directives in force.
Before service startup, be sure to verify whether the device has not
undergone any damage during transit. Any recognizable
transportation-related damage on the outside (e.g. to the case) must
be immediately relayed to the shipping company and your distributor;
should such a case arise, do not connect the device to the network!
Position the device on a stable and dry surface. Ensure sufficient
ventilation. Overly soft surfaces, like foams or rugs, must be avoided
due to the disturbing effect on device ventilation.
Risk of short-circuiting in the event humidity enters into the device!
Protect the device from humidity and maintain far from high-risk zones. The
interior part is to be protected from splashes. However, in order to avoid working
accidents and device downtime, be sure to keep the workplace clean and dry.
17/70
B
C
D