Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The measurements have been carried out using 2.5 bar waterpres-
Orificer
Hole dim.
Color
0,025
Orange
0,023
Brown
0,020
Yellow
0,016
Turquoise
0,014
Purple
0,012
Light Blue
0,010
Pink
8. Daily Operation
The Penguin Foam must only be
operated by authorised personnel
and accor ding to above instruc-
tions.
For further information please see
instruction label on the outside of
the Penguin Foam front cover.
Important: In order to secure an
unproblematic use of the Penguin
Foam, the injector must be thor-
oughly rinsed with clean water after
use.
9. Maintenance
• After use always rinse the wire
netting of the Topjet nozzle. The
wire netting can be dismounted
and descaled when required.
• The filter placed between the
inlet hose and the Ball valve unit
must be rinsed and descaled at
regular intervals.
4,77%
4,52%
4,07%
3,85%
3,11%
2,94%
2,01%
1,90%
1,55%
1,46%
1,14%
1,08%
0,79%
0,75%
Residues of detergents and disin-
fectants may clog the injector, so it
needs to be rinsed or replaced.
In order to remove detergent and/
or disinfectant residues from the
injector, please follow the instruc-
tions below:
1. Turn the operation button into
foam position.
2. Remove the chemical hose from
the detergent can and place it in
a can with clean water.
• The unit must be descaled ac-
cording to below instructions at
regular intervals
4,68%
4,34%
3,99%
3,70%
3,05%
2,82%
1,97%
1,82%
1,52%
1,40%
1,12%
1,03%
0,78%
0,72%
3. Activate the spray handle until
clean water comes out of the
nozzle (approx. 30 sec.)
We recommend you to close the
closing valve on the water sup-
ply and shortly activate the spray
handle to depressurize the system
after use.
4,29%
3,66%
2,79%
1,80%
1,39%
1,02%
0,71%
5
Publicité
Table des Matières
