Reversing The Door Swing; Tools Required; Before You Start - GE GTE 17 Manuel D'utilisation Et D'installation

2

REVERSING THE DOOR SWING

IMPORTANT NOTES
When reversing the door swing:
• Read the instructions all the way through before
starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid using
them in the wrong places.
• Provide a non-scratching work surface for the doors.
IMPORTANT: Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing the hinges from
the right side to the left side—if you ever want to
change the hinges back to the right side, follow these
same instructions and reverse all references to left
and right.

TOOLS REQUIRED

Phillips screwdriver
5/16" hex-head
socket driver
Putty knife or thin-
blade screwdriver
14
Installation Instructions
Masking tape
T20 or T25
Torxdriver,
(needed for
some models)
5/16" open-end
wrench
1

BEFORE YOU START

1.1 Unplug the refrigerator from its electrical
outlet.
1.2 Empty all door shelves, including the dairy
compartment.
CAUTION:
door drop to the floor. To do so could damage
the door stop.
Do not let either