Installation Instructions; Before You Begin - GE GTE 17 Manuel D'utilisation Et D'installation

Installation
Instructions

BEFORE YOU BEGIN

Read these instructions completely and carefully.
IMPORTANT –
•
instructions for local inspector's use.
IMPORTANT –
•
governing codes and ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
for future reference.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Completion time – Refrigerator Installation
15 minutes
Reversing the Door Swing
1 hour
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
WATER SUPPLY TO THE ICEMAKER
)
(on some models
If the refrigerator has an icemaker, it will have to be
connected to a cold drinking water line. A water supply
kit is available at extra cost from your dealer.
Installation of the icemaker must be done by a
qualified service technician.
REFRIGERATOR LOCATION
• Do not install the refrigerator where the temperature
will go below 16°C because it will not run often enough
to maintain proper temperatures.
• Install it on a floor strong enough to support it fully
loaded.
Save these
Observe all
Be sure to leave these
Keep these instructions
Refrigerator
CLEARANCES
Allow the following clearances for ease of installation,
proper air circulation and plumbing and electrical
connections.
• Sides 19 mm
• Top 25 mm
• Back 25 mm
DIMENSIONS
Model 16
A* 1556 mm
711 mm
B
C** 787 mm
D 1394 mm
E 657 mm
F 1346 mm
* Height does not include hinge—Add 22 mm for hinge.
** Depth includes handle.
Models 16, 17
17
1632 mm
711 mm
787 mm
1394 mm
657 mm
1346 mm
11