Handling Electrical Cables; Target Group For This Instruction Manual - Dometic FreshJet 3000 Instructions De Montage

Masquer les pouces Voir aussi pour FreshJet 3000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
FreshJet3000
• Do not make any alterations or conversions to the device.
• Never drive through automatic car washes when the roof air conditioner is
mounted.
• If faults occur in the refrigerant circuit, the system must be checked by a spe-
cialist company and repaired properly. The refrigerant must never be
released into the air.
I
NOTE
• Please ask your vehicle manufacturer if a technical inspection is required after
fitting an air conditioner and whether the height entered in the vehicle docu-
ments needs to be altered:
– FreshJet3000: increased height 240 mm
2.2

Handling electrical cables

!
WARNING!
• The electrical power supply may only be connected by a qualified electrician.
• The appliance shall be installed in accordance with national wiring regula-
tions.
!
CAUTION!
• Attach and lay the cables so that they cannot be tripped over or damaged.
A
NOTICE!
• Use cable ducts to lay cables through walls with sharp edges.
• Do not lay loose or bent cables next to electrically conductive materials
(metal).
• Do not pull on the cables.
3

Target group for this instruction manual

The instructions in this manual are intended for qualified personnel at workshops
who are familiar with the guidelines and safety precautions to be applied.
EN
Target group for this instruction manual
11

Publicité

Table des Matières
loading

Table des Matières