Assembly; Unpacking - Dirt Devil Aqua clean Mode D'emploi

02_DD302_gb.book Seite 43 Freitag, 17. April 2015 1:44 01

2 Assembly

2.1 Unpacking

2 Assembly
2.2 Assembly
2
click!
3
click!
1. Unpack the appliance and all its accessories.
2. Check the contents for completeness and possible
damage. Information regarding scope of supply Page
32, "Overview".
ATTENTION:
Always dispatch the appliance in its original packaging to
avoid transport damage. Keep the packaging for this pur-
pose. Dispose of any packaging material no longer
required in accordance with the applicable regulations of
your country.
NOTE:
Immediately contact your dealer if you have found any
transport damage.
1. Slide the connection piece into the base (Fig. 2) so that
the release catch audibly and visibly clicks into place.
2. Firmly insert the shaft into the intake opening (Fig. 3) so
that the release catch audibly and visibly clicks into
place.
NOTE:
If you wish to release the shaft again, firmly press in the
release catch and pull the shaft upwards out of the appli-
ance at the same time.
43