Tyre Pressure; Seat Adjustment - GGP ITALY MP 84C Manuel D'utilisation

a) To start the engine, it is necessary that:
– the transmission is in "neutral";
– the blades are not engaged;
– the operator is seated or the parking brake is engaged.
b) The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in
"neutral";
– the operator leaves his seat with the transmission in "neutral"
but without applying the parking brake;
– the grass-catcher is lifted or the stone-guard is removed when
the blades are engaged;
– the parking brake is engaged without disengaging the blades;
– the speed change is activated (
( 4.32) with the parking brake on.
5.3 DIRECTIONS BEFORE STARTING WORK
Before starting to mow, it is necessary to carry out several
checks and operations to ensure you can work efficiently and in
maximum safety.

5.3.1 Seat adjustment

To change the seat position,
loosen the four fixing bolts (1)
and slide it along the slots.
Once you have found the right
position, tighten the four screws
(1).
EN 18
4.22) or the drive pedal
1
1

5.3.2 Tyre pressure

Having the right tyre pressure is the main condition for ensuring
that the cutting deck is horizontal and mows evenly.
(13 x 5,00-6)
(15 x 5,00-6)
Unscrew the valve caps and connect a compressed air line with
a gauge to the valves and adjust the pressure to the indicated
values.
5.3.3 Filling with oil and fuel
NOTE
The engine manual indicates what type of
oil and fuel you can use.
With the engine off, check the
oil level. According to the in-
structions in the engine man-
ual, this must be between the
MIN and MAX marks on the
dipstick.