GGP ITALY MP 84C Manuel D'utilisation page 106

6.3.6 Dismantling, replacing and remounting the blades
WARNING!
Always wear work gloves when
handling the blades.
WARNING!
Damaged or bent blades must always
be replaced; never try to repair them! ALWAYS USE
ORIGINAL BLADES BEARING THE SYMBOL
Only blades with the following codes must be used on this ma-
chine:
82004358/0 - 82004359/0
82004360/0 - 82004361/0
IMPORTANT
Both of the blades should be replaced to-
gether, especially when there are slight differences in wear.
!
EN 31