GGP ITALY MP 84C Manuel D'utilisation page 91

4.33 HYDROSTATIC TRANSMISSION DISENGAGEMENT
LEVER
This lever has two positions:
«A» = Transmission en-
gaged: for all uses, when
moving and during cutting;
«B» = Transmission dis-
engaged: this makes it
much easier to move the
machine by hand, with the
engine turned off.
IMPORTANT
To avoid damage to the transmission
unit, this operation must be carried out only when the en-
gine has stopped with the pedal (4.32) on position «N».
EN 16
4.33