Guarantee; Eu Declaration Of Conformity - AL-KO HTA 2050 Mode D'emploi

Guarantee

NOTE
If you encounter any malfunctions that are not listed in this table or that you cannot rectify your-
self, please contact our customer service.
17 GUARANTEE
We will resolve any material or manufacturing faults on the appliance during the legal warranty period
for claims relating to faults, in accordance with our choice either to repair or replace. The legal warranty
period is determined by the legislation of the country in which the appliance was purchased.
Our warranty promise applies only if:
■
These operating instructions are heeded
■
The appliance is handled correctly
■
Original spare parts have been used
The guarantee excludes:
■
Paint damage that can be attributed to normal wear and tear
■
Wear parts that are marked with a frame
The guarantee period commences with purchase by the first end user. The date on the proof of pur-
chase is decisive. In the event of a guarantee claim, please take this guarantee declaration and the
original proof of purchase, and contact your dealer or the nearest authorised customer service centre.
This statement does not affect the purchaser's statutory claims for defects against the vendor.

18 EU DECLARATION OF CONFORMITY

We hereby declare that this product in its marketed form conforms to the requirements of the harmon-
ised EU Directives, EU safety standards and the product-specific standards.
Product
Battery long-reach hedge
trimmer
Serial number
G2033012
Type
HTA 2050
Sound power level
EN ISO 3744
measured/guaranteed
86,7 dB(A) / 89,0 dB(A)
442212_a
xxxxxx (x)
Manufacturer
AL-KO Geräte GmbH
Ichenhauser Str. 14
D-89359 Kötz
Germany
EU directives
2006/42/EC
2014/30/EU
2000/14/EC
2011/65/EU
Declaration of conformity
2000/14/EC Appendix V
The warranty becomes void in the case of:
■
Unauthorised repair attempts
■
Unauthorised technical modifications
■
Non-intended use
on the spare parts card
Duly authorised person for
technical file
Andreas Hedrich
Ichenhauser Str. 14
D-89359 Kötz
Germany
Harmonised standards
EN 62841-1
EN 60745-2-15
EN 55014-1
EN 55014-2
Kötz, 01/09/2017
Wolfgang Hergeth
Managing Director
39