Symbols on the scale
Start-up
Removing the iso-strips
When the scale is delivered, the battery is already inserted and fitted with iso-strips
to prevent it from discharging ahead of time. In order to start up the scale, you must
remove the iso-strips.
The battery compartment is located on the underside of the device.
1. With a little force, press on the arrow on the battery compartment cover and push it
upwards and off.
2. Pull out the iso-strips.
3. Push the battery compartment cover back into place.
Choosing the unit of measurement
When the scale is delivered, the unit of measurement is set to "kg" as standard.
However, the measurement result can also be displayed in the English units of
measurement, "lb" (pound) or "st:lb" (stone:pound).
− Press the kg lb st button next to the battery compartment on the reverse side of
the scale repeatedly. Pay attention to the display indicator.
Positioning the scale
− Place the scale on an even, firm, and dry surface. Do not place the scale on carpet.
This is how your body analyser scale work
Your new body analyser scale works using so-called BIA-technology (Bioelectric
Impedance Analysis) This involves an undetectable, completely harmless and weak
current flowing through your body.
Body Analyser Scale BA 1300-1304
The scale automatically switch on when you step onto the
weighing surface with a little force.
WARNING: When the weighing surface is damp, there is a risk of
slipping.
Start-up
21