Start-Up - ADE BE 1600 Mode D'emploi

Start-up

Inserting/changing batteries
To use the scales, a type CR2032, 3V battery is required.
In order to use the scales, you will need 4 batteries of type LR03 (AAA), 1.5 V (included).
The battery compartment is located on the underside of the device.
1. Slide the battery compartment cover in the direction indicated by the embossed
arrow (OPEN) until it stops, then remove it.
2. Insert the batteries as shown on the base of the battery compartment. Pay attention
to the correct polarity (+/-).
3. Replace the battery compartment lid and slide it towards the edge of the scale all
the way to the stop.
Notes on changing the battery:
‚ A change of batteries becomes necessary when "LO" appears on the
display, or when nothing at all is displayed.
‚ Only use the type of battery that is specified in the "Technical Data".
‚ Always change all batteries at the same time.
‚ Dispose of batteries in an environmentally appropriate way (see
"Disposal")
Positioning the scales
− Place the scales on an even, firm, and dry surface. Do not place the scales on
carpet.
Bathroom Scales BE 1600
Start-up
17