Presentation - hergom E-30 S Instructions D'installation, De Service Et D'entretien

1 - INTRODUCTION
IMPORTANT! All local regulations, including those
that refer to national or European regulations,
must be applied when installing this device.
The way the E-30 Stove is installed will decisively
affect safety issues and its correct operation.
It is important to install the fireplace correctly.
For the correct installation of the E-30 Stove and
chimney, we recommend the installation be
performed by a professional.
The E-30 Stove provides heat by radiation; directly
heating walls, ceilings...

2 - PRESENTATION

Door handle
Primary/glass pane
cleaning air valve
Lighting up valve
Ash-pan
E-30 wood stoves have the following main features:
• Made in 3 sizes: L, M and S, to meet each users'
heating requirements.
• Made of cast iron, with parts that are assembled,
sealed and screwed together.
• Vermiculite lined.
• They are designed for use with firewood only.
• They can burn pieces of wood up to 40, 50 or
60 cm. in length, depending on the model.
• Lighting up valve
• Primary air adjustment valve.
• Self-cleaning glass.
• Hinged front door opening 180º with ceramic
glass pane.
• Sealed ash-pan and blind grill.
• Vertical top smoke flue.
• This fireplace provides heat by radiation;
directly heating walls, ceilings...
• Fully factory assembled, ready for connection
to the chimney.
FIG. 1
FIG. 2