Presentation - hergom E-20 SE Instructions D'installation, De Service Et D'entretien

1- INTRODUCTION
IMPORTANT! All local regulations, including those
that refer to national or European regulations,
must be applied when installing this device.
The way the E-20 SE
decisively affect safety issues and its correct
operation.
It is important to install the fireplace correctly. For
the correct installation of the E-20 SE Stove and
chimney, we recommend the installation be
performed by a professional.
The E-20 SE Stove provides heat by radiation;
directly heating walls, ceilings...
Stove is installed will
2-

PRESENTATION

E-20 SE wood stove have the following main
features:
•
Made of cast iron, with parts that are
assembled, sealed and screwed together.
•
They are designed for use with firewood only.
•
They can burn pieces of wood up to 45cm. in
length.
•
Self-cleaning glass.
•
Hinged front door with ceramic glass pane.
•
Ash pan door sealed.
•
Vertical top smoke flue of 150 mm of diameter.
•
It gives up its heat by radiation, directly heating
walls, ceilings, etc.
•
Fully factory assembled, ready for connection
to the chimney.
Glass pane cleaning
air valve
Door handle
Ash pan door
Fig. 1
11