Rotating The Displayed Image; Monitoring Your Baby Silently - Philips SCD491 Mode D'emploi

Other features
EN
14

Rotating the displayed image

The Rotate image feature enables you to rotate the image 180°
for use of the camera in various positions e.g. when clipped to
the edge of a table or cupboard.
The Rotate image switch is located inside the monitor unit
battery compartment.
1 Slide down the belt clip/support (B-15) and lift it up.
2 Remove the battery compartment cover (B-7) by sliding it
downwards.
3 Set the Rotate image switch (B-11) to ON.
> The image is now vertically rotatated (180°) on the display.
• Set the Rotate image switch (B-11) back to return the image
back to its original setting.
Note:When the camera unit is connected to the TV, rotating
the image is not possible.

Monitoring your baby silently

• Use the ON/OFF switch/VOLUME control (B-8) on the
monitor unit to set the volume to the lowest level.
Do not switch off the monitor unit completely!
> The sound level lights (B-3) on the monitor unit visually
alert you to your baby's sounds.The more sounds your
baby makes, the more lights you will see.
> When no sound is detected all sound level lights (B-3) will
be off.