Publicité
Les langues disponibles
Les langues disponibles
G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please
keep these instructions in a safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
arning
W
This symbol is used to indicate safety instructions or to draw your attention to speci c
hazards and risks.
ote
N
This symbol is used to indicate additional information or important notes.
2. Package Contents
• TV bracket (1x)
• Mounting column (1x)
• Bottom panel (1x)
• Installation kit (see contents, Fig. 1)
• These operating instructions
ote
N
Please check that the installation kit is complete before installing the bracket and
ensure that none of the parts are faulty or damaged.
3. Safety Notes
W
arning
• Given the multitude of terminal devices available, the supplied mounting kit is
unable to cover every option.
• If the supplied mounting kit does not contain suitable fastening materials for
mounting the terminal device, purchase these from a specialised dealer.
• Never apply force during installation. This can damage your terminal device or
the product.
• If in doubt, have this product mounted by a quali ed technician - do not attempt
to mount it yourself!
• Place the product only on at, non-slip surfaces that can bear the weight of the
product and the device placed on it.
• Maintain the necessary safety clearance around the attached load (depending on
the model).
• Never exceed the maximum load-bearing capacity or maximum screen size speci ed
for the product.
• Make sure that the product is loaded symmetrically.
• Check the general operational safety regularly, and make sure that the product and
the device attached to it are positioned securely.
• You should repeat this check at regular intervals (at least every three months).
• In the event of damage to the product, remove the attached load and stop using
the product.
• Keep the packaging material out of the reach of children due to the risk of
suffocation.
• Dispose of packaging material immediately according to locally applicable
regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Do not attach any other objects to the product.
ote
N
Note that the feet of the product can cause pressure marks on the surface on which
the product is positioned. This will depend on the weight load and the stability of the
surface where the product is located.
4. Intended use and specifications
• The product is used for mounting at panel displays for non-commercial, private
household use.
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
00108788: 81.0 - 165.0 cm (US: 32" - 65")
Screen size:
00108789: 81.0 - 140.0 cm (US: 32" - 55")
according to the VESA standard until:
Screen size:
00108788: 600x400
00108789: 400x400
Loading capacity of the wall
00108788: 40 kg
bracket:
00108789: 30 kg
2
Angle:
+ 5° / – 10° (depends on the device)
Pivoting range:
up to 90° (depends on the device)
Dimensions of the bottom
00108788: 59.2 x 28 cm
panel:
00108789: 47.2 x 28 cm
00108788: 58.4 /65.4 /72.4 cm
Height:
00108789: 50 /57 /64 cm
5. Installation requirements and installation
N
ote
• Only mount the TV stand with the help of a second person! Get the support and
help you need.
• Ensure that no electrical cables are crushed or damaged during installation or
adjusting.
• Once you have mounted the product and the attached load, check that they are
su ciently secure and safe to use.
• Observe the other warnings and safety instructions.
• Proceed step-for-step in accordance with the illustrated installation instructions
(Fig. 1 ff.).
• First, secure the joint at the appropriate height and then mount the horizontal bar
( g. 5 and 6).
ote
N
• Given the multitude of terminal devices available on the market, we cannot
describe all possible mounting options here.
• Please ensure that the bracket lays at and evenly on the back of the television.
• Use the enclosed spacer to even out any unevenness on the back of the television.
• Ensure that all screws have the proper length and can be mounted until they are
hand-tight (see Fig. 8).
6. Setting and maintenance
N
ote
• Only adjust the bracket with the help of a second person. Get the support and
help you need.
• When doing so, ensure that the product does not exceed its maximum permitted
carrying capacity and that no load exceeding the maximum permitted dimensions
is attached.
• Check that the bracket is secure and safe to use at regular intervals (at least every
three months). Only use water or standard household cleaners for cleaning.
• Secure by inserting the carrying arms into the wall plate and tightening both screws.
• If the rotate function is stiff, loosen the screws on the base plate and/or the inner
screws on the rotation ring a little (Fig. 4, Fig. 3 detailed view).
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or from
failure to observe the operating instructions and/or safety notes.
Publicité
