Base Lights; Navigating The Menu - Topcom Butler 5500 Mode D'emploi

2.2 ICONS
Call in progress
End Call
Missed calls in call list*
Handset ringer volume OFF
Within base range
Handset not registered
or out of range
Battery status
Empty
Low battery
Medium
Full
* If the Caller line identification service is available on the telephone line
** If the Phonemail service is available on the telephone line
*** If the SMS service is available on the telephone line
2.3

BASE LIGHTS

Missed calls indication
New SMS messages received
Handset on base
- Off: No base power connected
- ON: power connected
- Blinking slowly: Off hook or SIM card copy
- Blinking rapidly: during registration mode or Phonemail*
* If the Phonemail service is available on the telephone line
2.4

NAVIGATING THE MENU

The Butler 5500 has a menu system which is easy to use. Each menu leads to a list of options. The menu map is shown
on the following paragraph.
When the handset is switched on and in standby, press the option button under "MENU" to open the main menu.
Press the or button to scroll to the menu option you want. Then press OK to select further options or confirm
the setting displayed.
Exit or go back one level in the menu
To the previous level in the menu, press BACK.
To cancel and return to standby at any time, press
standby automatically.
6
New voice mail**
Keypad locked
Alarm set
List contains unread or missed calls
not yet consulted
New SMS message received***
. If no button is pressed for 60 seconds, the handset returns to
Topcom Butler 5500
Topcom Butler 5500