Connecting Your Tv; Playing Your Ipod/Iphone - Pioneer MUSIC TAP Elite X-SMC4-k Mode D'emploi

05 iPod/iPhone playback
3 Connect your iPod/iPhone.
• When your iPod/iPhone is not connected to the unit,
close the iPod/iPhone connector port firmly.

Connecting your TV

To watch iPod/iPhone images on a television, connect it using
a composite video cable.
• When an iPod/iPhone is connected to this unit, the TV
output setting of the iPod/iPhone is automatically set to
1
'ON'.
Note
1 • Some iPod allow the TV output setting to be changed while connected.
• When the iPod/iPhone is disconnected from this unit, the iPod/iPhone's TV output setting returns to its original state.
2 No icon will be displayed on the main display when the iPod/iPhone is in the repeat mode or shuffle mode.
3 Only when Power Save mode is selected in Auto mode select (page 30).
16
En
3
2
Push

Playing your iPod/iPhone

Caution
• When your iPod/iPhone is connected to this unit and you
wish to operate the iPod/iPhone directly, be sure to hold
the iPod/iPhone steady with the other hand to prevent
malfunctions due to faulty contacts.
1 Connect your iPod/iPhone.
• To connect your iPod/iPhone, see Connecting your iPod/
iPhone on page 15.
Press FUNCTION / to select iPod as the
2
input source.
iPod is shown on the main display and starts playback.
The following operations are possible for iPod/iPhone.
Button What it does
 PLAY Starts normal playback.
Pauses playback.
 PAUSE
Pauses playback.
 STOP
Press to skip to the start of the current file, then
 PREV
previous files.
 NEXT Press to skip to the next file.
 Press and hold to start fast reverse scanning.
Press and hold to start fast forward scanning.

The currently selected iPod/iPhone tracks are
SHUFFLE
played back in random order (shuffle play).
The currently selected iPod/iPhone tracks are
REPEAT
played back repeatedly.*
Use to access the iPod/iPhone menu.
MENU
//ENTER
Use to control the iPod/iPhone menu.
*
Each time you press REPEAT the repeat modes changes as
2
.
below

Repeat 1 Repeat all
Repeat 1: Repeats a file currently played back.
Repeat all: Repeats all files.
When no device is connected to the iPod/iPhone connector
port and this unit is not operated for 30 minutes or more,
power will automatically turn off.

Normal playback
3