Using The Tuner; Listening To The Fm Radio Broadcasts; Saving Stations; Listening To Station Presets - Pioneer MUSIC TAP Elite X-SMC4-k Mode D'emploi

Using the tuner

Chapter 10:
Using the tuner

Listening to the FM radio broadcasts

The tuner can receive FM broadcasts, and can save your
favorite stations.
Press FUNCTION / to select FM.
1
The tuned frequency will be displayed on the main display.
2 Tune into a station.
When the tuner receives FM broadcasts, the TUNE indicator
lights.
There are two ways to do this:
- To search for stations, press and
Automatic tuning
hold TUNE +/– for about a few seconds. This unit will
start searching for the next station, stopping when it has
found one. Repeat to search for other stations.
- To change the frequency one step at
Manual tuning
a time, press TUNE +/–.

Saving stations

You can save up to 9 station presets so that you always have
easy access to your favorite stations without having to tune in
1
manually each time.
• Manually saving station presets
Press FUNCTION / to select FM.
1
The tuned frequency will be shown on the main display.
2 Tune into a station.
3 Press and hold a number button (1 to 9) for
a few seconds.
The tuned frequency is preset to the selected number button.
The previous station preset is overwritten.
Note
1 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will be overwrit-
ten with the new one.
• Automatically saving station presets
1 Press and hold PRESET + for a few seconds.
Auto tuning starts.
• The tuned frequencies will be preset to the buttons in
numerical order.
• Auto tuning stops after the FM band has finished, or the
limit of 9 presets has been reached.

Listening to station presets

Press FUNCTION / to select FM.
1
The tuned frequency will be shown on the main display.
2 Press the number button (1 to 9) that stores
the FM radio station.
Tip
• Press PRESET +/– repeatedly to selected the station
preset in numerical order.
10
27
En