Connecting Antennas; Using External Antennas; Connect The Ethernet Cable - Pioneer X-CM66D Mode D'emploi

Connections

Connecting antennas

• Connect the DAB/FM wire antenna as shown below.
• To improve reception and sound quality, connect
external antennas (see Using external antennas).
1 Connect the DAB/FM wire antenna into the
DAB/FM antenna socket.
For best results, extend the DAB/FM antenna fully and fix to
a wall or door frame. Don't drape loosely or leave coiled up.

Using external antennas

To improve signal reception
Use a PAL connector (not supplied) to connect an external
DAB/FM antenna.
One-touch PAL
connector
75 coaxial
cable

Connect the Ethernet cable

Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy features such as TuneIn and
Spotify by connecting to the network. If you connect by
wired LAN, connect with an Ethernet cable to the NETWORK
port as shown in the illustration. To connect by Wi-Fi, refer to
"Connecting to the network via Wi-Fi"(page 11).
• Use a shielded CAT5 Ethernet cable (straight-type).
03
9
En