Audio Signals That Can Be Output From This Unit's Hdmi Out Terminal; Connecting The Fm Antenna; Using External Antennas; Plugging In - Pioneer X-CM52BT-K Mode D'emploi

03 Connections
Audio signals that can be output from
this unit's HDMI OUT terminal
• 44.1 kHz to 96 kHz, 16-bit/ 20-bit/ 24-bit 2-channel linear
PCM audio (including 2-channel downmixing)
• Dolby Digital 5.1-channel audio
• MPEG audio
• Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.

Connecting the FM antenna

Connect the FM antenna plug onto the center pin of the FM
antenna socket.
FM wire antenna
Note
• To ensure optimum reception, make sure the FM
antenna is fully extended and not coiled or hanging at
the rear of the unit.
14
En
(supplied)
This unit's rear panel
Y
P
R
ANTENNA HDMI
OUT
P
B
OUT
COMPONENT
FM
UNBAL 75 Ω
VIDEO

Using external antennas

To improve FM reception
Use a PAL connector (not supplied) to connect an external FM
antenna.
75 coaxial cable

Plugging in

Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
After you've finished making all connections, plug the unit
into an AC outlet.
This unit's rear panel
VIDEO
Y
OUT
SPEAKERS
P
R
R
P
B
L
OUT
COMPONENT IN
R
VIDEO LINE
To AC outlet
CAUTION
• Do not use any power cord other than the one supplied
with this unit.
• Do not use the supplied power cord for any purpose
other than that described above
One-touch
PAL connector
ANTENNA
FM
UNBAL 75 Ω
AC IN
L
Power cord