General Information; Safety Information - Hach TOC-X5 Manuel D'utilisation

Specifications
Specifications are subject to change without notice.
Specification
Dimensions
Power supply
Instrument
Plug-in power supply unit
Operating 4equirements
Storage requirements
Weight
Enclosure
Overvoltage category
Pollution degree
Altitude
Environmental conditions
Compliance
Warranty

General information

In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right
to make changes in this manual and the products it describes at any time, without notice or
obligation. Revised editions are found on the manufacturer's website.

Safety information

The manufacturer is not responsible for any damages due to misapplication or misuse of this product
including, without limitation, direct, incidental and consequential damages, and disclaims such
damages to the full extent permitted under applicable law. The user is solely responsible to identify
critical application risks and install appropriate mechanisms to protect processes during a possible
equipment malfunction.
Please read this entire manual before unpacking, setting up or operating this equipment. Pay
attention to all danger and caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
Make sure that the protection provided by this equipment is not impaired, do not use or install this
equipment in any manner other than that specified in this manual.
Details
190 x 112 x 240 mm (7,48 x 4,41 x 9,45 in.)
100–240 VAC ± 10%; 50/60 Hz; 0,75 A
15 VDC; 30 VA
LZV563
10 to 40 °C (50 to 104 °F); maximum 80% relative humi-
dity (non condensing)
-40 to 60 °C (-40 to 140 °F); maximum 80% relative
humidity (non condensing)
2,9 kg (6,39 lb), inclusive plug-in power supply unit
IP20
II
2
2000 m (6562 ft) maximum
Indoor use
CE
EU: 2 years (US: 1 year)
English
English 33