Bosch ART 23 G Instructions D'emploi page 14

EURO • Printed in England • BA F 016 L69 858 • ART 23/25 • GB • OSW 07/01
F016 L69 858.book Seite 2 Freitag, 6. Juli 2001 11:50 11
Product Specification
Line trimmer ART 23 G
Part number 0 600 827 5.. 0 600 827 6.. 0 600 827 8.. 0 600 827 9..
Rated power 220 W
No-load speed 12 000 RPM 12 000 RPM 12 000 RPM 12 000 RPM
Cutting line feed automatic
Adjustable handle –
Adjustable cutting
direction/height –
Cutting line Ø1.4 mm
Cutting circle 23 cm
Weight
(without optional
extras) 1.4 kg
Protection class
/ II
Serial Number See serial No 12 (rating plate) on machine
Noise/Local Authority
Information
This product operates at a low noise level, refer to
the regulations in your country.
Intended Use
The machine is intended for cutting of grass and
weeds under bushes and shrubbery as well as on
slopes and edges that cannot be reached with the
lawn mower.
Introduction
This manual gives instructions on the correct assem-
bly and safe use of your machine. It is important that
you read these instructions carefully.
Delivered Items
Carefully remove the machine from its packaging
and check that you have all the following items:
– Line trimmer
– Cutting guard
– Adjustable handle (fitted)
Model ART 23 GFS/GFSV
Model ART 25 GSA/GSAV
– Operating instructions
– Spare parts list
When parts are missing or damaged, please contact your
dealer.
14 • F016 L69 858 • 07.01
ART 23 GF ART 23 GFS ART 23 GFSV ART 25 GSA ART 25 GSAV ART 25 ERGO-
220 W 220 W 220 W
automatic automatic automatic
– • •
– – •
Ø1.4 mm Ø1.4 mm Ø1.4 mm
23 cm 23 cm 23 cm
1.5 kg 1.8 kg 1.9 kg
/ II / II
**Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
English - 2
0 600 828 0.. 0 600 828 1.. 0 600 828 171
350 W 350 W
10 000 RPM 10 000 RPM
fully automatic fully automatic fully automatic
• •
– •
Ø1.6 mm Ø1.6 mm
25 cm 25 cm
2.4 kg 2.4 kg
/ II / II / II
Operating Controls
1 On/off-switch
2 Handle
3 Guide handle
4 Adjustable handle (ART 23 GFS/GFSV)
(ART 25 GSA/GSAV)
5 Shaft
6 Trimmer head
7 Ventilation slots
8 Cutting guard
9 Release button (ART 23 GFSV)
(ART 25 GSAV)
(ART 25 ERGOPOWER)
10 Clamping lever (ART 23 GFS/GFSV)
(ART 25 GSA/GSAV)
11 Mains plug**
POWER
350 W
10 000 RPM
–
•
Ø1.6 mm
25 cm
2.4 kg
/ II