Operating Noises; Disposal - AEG 88032K-IN Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem/Display
Acoustic signal sounds and ap-
pliance switches itself on and
then off again; after 5 seconds
another acoustic signal sounds
If you are unable to remedy the problem by following the above suggestions, please
contact your local Service Force Centre.
WARNING!
Repairs to the appliance are only to be carried out by qualified service engineers. Consid-
erable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be chargeable, even
during the warranty period.

Operating noises

Depending on the material and the processing of the base, the following noises may occur
when using induction cooking zones.
• Cracking noise
when using cookware made of different mate-
rials (Sandwich construction)
• Whistling
when using an individual cooking zone or sev-
eral cooking zones with high powers when the
cookware is made of different materials (Sand-
wich construction)
• Humming
can occur at high power levels
• Clicking
during electric switching processes
• Hissing, buzzing
The device is fitted with a fan for cooling the electrics. A whiring noise can be heard
when operating the fan which may deviate depending on the performance and may
continue for a while after the appliance is switched off.
The noises described are normal and do not refer to any defects.

Disposal

The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please contact
The On/Off sensor field has
been covered up, e.g. by a cloth
1
1
2
2
3
on the product or on its packaging indicates that this product may not be
Possible Cause
1
Disposal
Remedy
Do not place any objects on the
control panel
35
2
3

Publicité

Table des Matières
loading

Table des Matières