Description Of The Appliance; Cooking Surface Layout - AEG 88032K-IN Notice D'utilisation

Description of the appliance

Cooking surface layout

1 Induction cooking zone 2300 W, with power function 3200 W
2 Induction cooking zone 2300 W, with power function 3200 W
3 Induction cooking zone 2300 W, with power function 3200 W
4 Induction cooking zone 2300 W, with power function 3200 W
5 Control panel
The cooking surface is divided into four cooking zones. In each cooking zone under the
glass ceramic is an induction heating element, the middle of each one being marked with
a cross on the glass ceramic surface. Cookware can be placed on any of the cooking zones.
But the cross must be completely covered by the cookware. The bottom of the cookware
must be from 125 - 210 mm in diameter.
WARNING!
Keep the pots out of the panel frame!
Cooking over two cooking zones
Large cookware can be heated with two cooking zones simultaneously. Either the two
cooking zones on the left-hand side or on the right-hand side of the cooking surface are
suitable for this.
1. Place cookware centrally on the two zones.
The cookware must cover at least two crosses.
2. Set the same heat setting for the two cooking zones (max. setting 8).
With different cookware there can be differences in the heat distribution. Good cooking
results can be achieved with cookware with thick, flat bottoms.
1 2 3
5
Description of the appliance
4
23