Alarm; Setting The Alarm Time - ADE CK 1708 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56

Alarm

‚ When the timer is enabled, "SLEEP" flashes in the display.
‚ If you want to deactivate the function again, select the option "OFF"
instead of a time value.
Alarm
You can set two different alarm times with the radio-controlled alarm clock: A1 and A2.
The procedures for setting are identical.

Setting the alarm time

‚ If there is more than approx. 20 seconds between two pushes of a
button, the setting process automatically ends and you will have to
repeat it. Settings you have already made remain saved.
‚ Observe the display during setup. There you will also see which settings
you are currently making: A1 and A2 = alarm times, SN = snooze time.
‚ If you press and hold + or – button, the displayed values change more
quickly.
1. Press and hold the alarm button.
The display shows
If you wish to set alarm time "2", repeatedly press alarm until
2. Use +/– to set the desired alarm hour.
3. Press alarm to confirm the setting.
The minute indicator flashes in the display.
4. Use +/– to set the desired alarm minute.
5. Press alarm to confirm the setting.
The "snooze time" (the time between two alarm repetitions) flashes in the display.
6. Use +/– to set the desired snooze time (default setting: 5 minutes)
7. Press alarm to confirm the setting
The hour indicator for alarm time 2 flashes in the display.
8. Proceed as described to set the second alarm time or press alarm repeatedly until
the display shows the normal time again.
9. Enable the respective alarm function (or both) by sliding the
on.
The set alarm time and the corresponding alarm symbol
display.
The alarm function is enabled, the setting process is finished.
32
and the hour digit flashes.
is displayed.
1 or
or
are shown on the
DCF Radio Alarm Clock CK 1708 | CK 1709
2 switch to

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ck 1709

Table des Matières