After Use; Reuse; Disposal; Technical Data - Aria 1.0 Mg Manuel D'utilisation

10. AFTER USE

10.1 REUSE

The wheelchair can be reused. It is necessary to carry out the following operations:
• Cleaning and disinfection according to descriptions in chapter 8.3 Care and chapter 8.4 Disinfection of this User
Manual.
• Inspection according to description in chapter 8.2 Maintenance plan of this User Manual.
• Adjustment to the user, based on the Technical Assistance documentation available at Aria Wheels main office.

10.2 DISPOSAL

Defend the environment providing an adequate disposal of your wheelchair. Observe the national law and local
regulations for the disposal.
For a correct disposal, contact your specialized dealer or your council's public administration as to get the address
of a local disposal centre.

11. TECHNICAL DATA

11.1 WEIGHT AND DIMENSIONS

All weight and dimension specifications refer to a width of the seat and to its depth in all the possible configurations
of the wheelchair. Dimensions and weight may change according to the different configurations.
Seat width:
Seat depth:
Seat to footrest:
Backrest height:
Knee-to-heel length:
Front seat height:
Rear seat height:
Centre of gravity
Backrest angle:
Rear wheel axle:
Frame angle
Wheelchair weight SW440 with standard rear
wheels:
(postural backrest included)
Wheelchair weight SW440 without
rear wheels:
(postural backrest included)
Nominal load:
The weight depends on the possible configurations. Some dimensions may not be available for some
wheelchair models. See the product order forms for the specs.

11.2 ENVIRONMENTAL CONDITIONS

Do not expose the wheelchair to temperatures below -20 °C and above 40 °C.
11.3 TYRES
The optimal pressure depends on the kind of tyre:
Max Tyre Pressure
High ease of movement tyres 7 bar 700 kPa 101 psi
Profiled tyres (Marathon) 7,5 bar 750 kPa 108 psi
Slick tyres (speed run) 10 bar 1000 kPa 145 psi
ENG 72
340 - 460 mm ( in increment of 20 mm )
ULTRA 340 - 440
360 - 460 mm ( in increment of 20 mm )
120 - 180 mm ( in increment of 20 mm )
available only for Aria 1.0Mg and ULTRA
240 - 420 mm ( in increment of 15 mm )
300 - 440 mm ( in increment of 10 mm )
450 - 520 mm ( in increment of 10 mm )
360 - 430 mm ( in increment of 10 mm )
100 - 150 mm ( in increment of 10 mm )
85° - 95° to floor
0° or 3°
83° for Aria 1.0Mg and ULTRA
83° o 93° available only for Aria 2.0Al
approximately 9.5 kg* for Aria 1.0
approximately 10.7 kg* for Aria 2.0
approximately 8.1 kg* for Aria ULTRA
approximately 6.3 kg* for Aria 1.0
approximately 7.5 kg* for Aria 2.0
approximately 4.9 kg* for Aria ULTRA
120 kg / 100 Kg (ULTRA) / 75 Kg (KID)
Mountain bike tyres 4 bar 400 kPa 58 psi
Solid rubber tyres - -