Aria 1.0 Mg Manuel D'utilisation page 67

Check tyre pressure
Check correct position
of rear wheels
Check adjustment of
the backrest joint
Check the posture
maintenance belt
Visual check
Cleaning of front
wheels
Check bolt
connections
Check wheel spokes
Check parking brakes
Get wheelchair
checked by a
specialized dealer
Check tyre pressure
Measure the tyre pressure checking with the relative pressures, ( see the chapter 11.3 Tyres ).
1. Inflate the tyre to the required pressure.
2. Check the tyre profile as well.
3. If necessary, replace the tyres.
Check the correct position of the rear wheels
1. Pull the rear wheel to check that the axle is correctly positioned in its location. It should not be possible to extract
the wheel.
2. In case the rear wheels do not block into their location correctly, remove any deposit of dirt and scale. If the
problem persists, get a specialized dealer to re-adjust the axle.
Check the adjustment of the backrest joint
1. Sit in the wheelchair and lean back onto the backrest. The backrest must be correctly blocked.
2. Pull the release cord. The pivots must be able to move freely on both sides. Otherwise, the backrest joint will have
to be re-assembled by a specialized dealer.
Check the posture maintenance belt
1. Check that the posture maintenance belt is adjusted correctly.
Weekly
X
X
X
X
Monthly
X
X
X
X
X
Yearly
X
67 ENG