Footrest; Anti-Tip Devices - Aria 1.0 Mg Manuel D'utilisation

3.6 FOOTREST

The height of the footrest can be adjusted by unscrewing the two screws on the frame, adjusting the desired height
and tightening it again. Also it is possible to adjust the angle of the footrest by loosening the screws under the
aluminium or carbon fibre plate. Adjusted the angle to retighten the previously loosened screws. Adjustments must
be performed by the specialist dealer.
3.7 ANTI-TIP DEVICE
An anti-tip device stops the wheelchair from tipping backwards. The device is adjustable based on different needs. It
is fixed to the central element in carbon fibre thanks to a clamp. It can be positioned on the right or left side
ENG 48