Aria 1.0 Mg Manuel D'utilisation page 68

Visual check
1. Check if the wheelchair presents any loose parts, cracks or other defects.
2. In case any defects are identified, get a specialized dealer to immediately check the wheelchair.
Cleaning the front wheels
1. Check if the front wheels can be rotated freely.
2. Remove any dirt and hair from the front wheel bearings.
Check on bolt tightening
Bolts can loosen due to a constant use of the wheelchair.
1. Check that bolts are correctly tightened (footrest, seat cover, sides, backrest, frame, seat module).
2. Tighten any loose nuts with an adequate torque.
Check spoke tension
Spokes must not be loose nor deformed.
1. Get a specialized dealer to adjust the tension of loose spokes.
2. Get a specialized dealer to replace any broken spokes.
Check parking brakes
1. Check the correct position of the parking brakes in their location.
The brake is adjusted correctly if, when the brake is in use, the brake shoe penetrates into the tyre for a few
millimetres.
2. In case you realise the adjustment is incorrect, get a specialized dealer to adjust the brake correctly.
ENG 68
IMPORTANT!
Loose posture maintenance belts must be adjusted by a specialized dealer.
Damaged posture maintenance belts must be replaced by a specialized dealer.
IMPORTANT!
Safety nuts and bolts lose their efficiency after they have been loosened and
tightened several times.
Get a specialized dealer to replace the safety nuts and bolts.
IMPORTANT!
After replacing o changing the position of the rear wheels, it's necessary to re-
adjust the parking brakes.