Backrests - Aria 1.0 Mg Manuel D'utilisation

3.3 BACKREST
Backrest cover
Aria wheelchair is supplied with a padded cover for the backrest in carbon fibre.
The cover in breathable material is removable thanks to an ad-hoc zipper and conveniently washable
Height of the postural backrest
It is possible to adjust the height of the backrest. Remove the upholstery, unscrew the 4 screws and screw them
back in at the desired height. The adjustment has to be made by the specialised dealer.
ULTRA tension backrest
The tension of the backrest straps can be adjusted. Remove theupholstery, tension the bands according to the
desired posture. The adjustment has to be made by the specialised dealer.
Inclination of the postural backrest
It is possible to adjust the inclination of the backrest unscrewing the two screws on the clamp, adjusting the
inclination and screwing them back in. The adjustment should be done by the specialised dealer.
ENG 46