Remote Control - Dometic CoolAir RTX1000 Notice D'utilisation

CoolAir RTX1000, RTX2000
6.3

Remote control

The remote control contains the following operating elements:
No. in
fig. 3, page 4
1
2
3
4
5
6
7
8
9
EN
Symbol Description
Press button briefly: Switches the parking cooler
to standby mode or on again, if it is in standby mode
Press button longer than 3 s: Switches the
parking cooler off
The parking cooler only can be switched on at the
control panel.
Increases the timer running time by 10 minutes.
Reduces the set point by 1 °C/2 °F.
–
Increases the set point by 1 °C/2 °F.
+
Switches the parking cooler to MANUAL mode and
–
reduces the speed of the fan.
Switches the parking cooler to MANUAL mode and
+
increases the speed of the fan.
Switches the parking cooler to AUTO mode.
Switches the parking cooler to ECO mode.
Switches the parking cooler to BOOST mode.
Operation
11