Operation Control; Temperature Selection - ETNA EEO131VA Mode D'emploi

Operation Control

The appliance is controlled with thermostat knob,
situated in the right upper part inside the
appliance.
Turn the knob clockwise from STOP (0) position
towards 7 and backwards.

Temperature Selection

• Higher settings on the knob (towards 7) mean
lower temperatures (colder) in all three
compartments of the appliance. At higher
settings temperature in the interior of the
appliance may even drop below 0°C.
When the ambient temperature is normal, we
recommend medium setting.
• Changes of the ambient temprature affect
temperature in the interior of the appliance
(choose correct setting of the thermostat knob).
• In STOP (0) position the appliance does not
operate (the cooling system is switched off), yet
power supply is not interrupted (the light is on,
when you open the refrigerator door).
• Temperature in the refrigerator and in freezing
compartment depends on the frequency of
opening the door as well.
Instructions for Use
51