Table des Matières
Publicité
EMC tables
Guidance and MANUFACTURER'S declaration – ELECTROMAGNETIC EMISSIONS
– FOR ALL THE EQUIPMENT AND THE SYSTEMS
LYMPHOPRESSS 4 is intended for use in the electromagnetic environment specified
below. The customer or the user of the LYMPHOPRESS 4 should assure that it is used
in such an environment.
Emission test
RF emissions
Cispr 11
RF emissions
Cispr 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Guidance and MANUFACTURER'S declaration – ELECTROMAGNETIC IMMUNITY
– FOR ALL THE EQUIPMENT AND THE SYSTEMS
LYMPHOPRESS 4 is intended for use in the electromagnetic environment specified
below. The customer or the user of LYMPHOPRESS 4 should assure that is used in
such environment.
Immunity test
Electrostatic
discharge (ESD)
EN 61000-4-2
IACER SRL
Compliance
Group 1
Class B
Class A
Complies
Complies
Test
level
EN
60601-1-2
± 6kV contact
± 8kV air
Page 21 de 28
Electromagnetic environment –
guidance
LYMPHOPRESS 4 uses RF energy
only for its internal function. Therefore,
its RF emissions are very low and are
not likely to cause any interference in
nearby electronic equipment
LYMPHOPRESS 4 is suitable for use in
all establishments, including domestic
establishments
connected to the public low-voltage
power supply
buildings used for domestic purposes.
The LYMPHOPRESS 4 is suitable for
use in all establishments, other than
domestic establishments and those
directly connected to the public low
voltage power supply network that
supplies buildings used for domestic
purposes
Compliance level
± 6kV contact
± 8kV air
and
those
directly
network that supplies
Electromagnetic
environment
guidance
Floors
should
be
wood, concrete or
ceramic tile. If floor
are
covered
with
synthetic
material,
the relative humidity
should be at least
30%
MNPG93-01 del 05/05/15
–
Publicité
Table des Matières
