Weigh And Add; Remove Part Of The Weighed Food; Set The Countdown Timer / Alarm; Display Ambient Temperature - SilverCrest HG01696B Instructions D'utilisation Et Consignes De Sécurité

Note: If the product is overloaded, the LCD read-
out indicates "Err" and it will switch off within
4
3 seconds. Remove food from the product then
press the ON/OFF button
product again.

Weigh and add

Q
The product allows you to weigh foods consecu-
tively without removing food already in the weigh-
ing bowl
.
1
Place the weighing bowl
Press the ON / OFF button
product on.
Select the unit of weight by pressing the unit of
weight button . You can choose between
5
"g / kg" and "oz / lb".
Place the food you wish to weigh in the weigh-
ing bowl .
1
The LCD readout
4
food in the selected unit of weight.
Now press the Zero button
now reads "TARE".
Now place more food in the weighing bowl
The LCD readout
4
food you have added in the selected unit of weight.
Continue in this way only until the maximum
capacity of the product is reached or the
weighing bowl
1
Remove part of the
Q
weighed food
Place the weighing bowl
Press the ON / OFF button
product on.
Select the unit of weight by pressing the unit of
weight button . You can choose between
5
"g / kg" and "oz / lb".
Place the food you wish to weigh in the
weighing bowl .
1
The LCD readout
4
food in the selected unit of weight.
Now press the Zero button
to switch on the
2
on the product.
1
to switch the
2
indicates the weight of the
. The product
6
indicates the weight of the
is full.
on the product.
1
to switch the
2
indicates the weight of the
.
6
Now remove the required amount of food from
the weighing bowl
The LCD readout
food you have removed as a negative number.
Now press the Zero button
now reads 0 g / 0.0 oz and "TARE" for further
removal / adding food.

Set the countdown timer / alarm

Q
The timer on the product has a time span of 00:10
to 99:50 minutes. The set time is counted down in
reverse to "00:00". An alarm signal then sounds
and the alarm display " "
Press the ON / OFF button
product on.
Press the Timer button
Set the required time by pressing the Timer button
" " , or the Timer button " "
5
Press the Timer button
set time and to start the countdown timer.
Press the Timer button
countdown timer.
. Press the Timer button
1
time to "00:00".
NOTE: When the set time has elapsed, an alarm
signal sounds.
Press the ON / OFF button
at the same time switch off the product.

Display ambient temperature

Q
When the product is switched on, the LCD readout
shows the current ambient temperature. This is
4
indicated by the temperature display

Switch off the product

Q
The product switches itself off automatically after
90 seconds of inactivity to save energy.
Press the ON / OFF button
product off manually.
.
1
indicates the weight of the
4
. The product
6
flashes.
15
to switch the
2
.
3
.
6
again to confirm the
3
again to stop the
3
again to reset the set
3
to stop the alarm and
2
in °C.
12
to switch the
2
GB/IE 19